Category: How To

InHow To

DSC

Check out these quick how to guides for replacing the batteries on your Phone Experts security & safety devices. Motion Detector Slide sensor up to remove off mounting plate. Flip over Replace with 4 AA batteries. Door Contact Place flat head screwdriver in slot on short side of contact & lift upwards. Lift cover off….
InHow To

DSC NEO

Check out these quick how to guides for replacing the batteries on your Phone Experts DSC Neo security & safety devices. Motion Detector Undo screw on bottom of device. Carefully lift top cover off as it is hooked at the top of the device. Pull back the tab holding the circuit board in place to…
InHow To

GE Security & Safety Devices.

Here’s a quick guide for replacing the batteries on your Phone Experts GE Security & Safety devices. So you can get them functioning properly. GE Motion Detectors First of all depress the tab on top of motion detector and detach so you can remove it from the wall. Pull away from wall, as a result…
InHow To

NEC ELITE AND NEC IPK CLOCK/CALENDAR SETTING

settings. To set the clock or calendar: Press the Feature Key. Dial 9# Enter the hour and minute via the dial pad. Press the Recall key to change the AM/PM setting. Press the Hold key to change the calendar setting. OR Press the Feature key to exit this feature. Press the Recall key to select the day of the week. Dial # to move…
InHow To

BUSINESS CONNECT – POLYCOM BYOD

Speed up your Polycom BYOD device provisioning I have a problem, I’m lazy when it comes to provisioning BYOD Polycom Phones in Telus Business Connect.  When performing a 10+ seat instal, the time spent entering provisioning server information can be upwards of 5 min per phone.  I know that doesn’t sound like much, but if you…