To Enroll a Proximity Tag

  1. Press *5 or press * and use the scroll keys to navigate to Access Codes and press *
  2. Enter Master or Supervisor Code
  3. Enter User # or Scroll through the list of user and press *.  On a LED keypad the user number will begin flashing.
  4. Press 2 or scroll to Prox Tag and press *
  5. If no tag is enrolled for this user, you will be asked to present the tag to reader.

* If the card successfully enrolls the blue LED bar flashes

* If the tag is invalid the following message is displayed.

* If the tag already is enrolled with another user, the following message is displayed

To Delete a Proximity Tag

  1. Press *5 or press * and use the scroll keys to navigate to Access Codes and press *
  2. Enter Master or Supervisor Code
  3. Enter User # or Scroll through the list of user and press *.  On a LED keypad the user number will begin flashing.
  4. Press 2 or scroll to Prox Tag and press *
  5. If a tag is enrolled for this user, you will be asked if you would like to delete the Tag. Press * to delete the tag.

Naming a User

  1. From the user codes menu press 3 or scroll to User Labels and press *.
  2. Use the arrow keys to move the cursor to a blank space or existing character.
  3. Press the number key corresponding to the appropriate letter.  (1 – ABC, 2-DEF, 3-GHI, 4-JKL, 5-MNO, 6-PQR, 7-STU, 8-VWX, 9-YZ, 0-Space)
  4. When the required letter or number is displayed use the arrow keys to scroll to the next letter.
  5. When finished, press the * key, use the keys to scroll to Save then press *

Assigning a Partition to a User Code

  1. From the desired user press 4 or scroll to Partition Assign and press *.
  2. Press * to change the partition assignment for the user code, Y or N.

If using an LED or ICN keypad press the corresponding number key for the partition, 1 to 8, to change the programming of the option.

Comments