Check out these quick how to guides for replacing the batteries on your Phone Experts GE security & safety devices.

Motion Detector

  1. Depress tab on top of motion detector
  2. Pull away from wall.
  3. Depress three tabs on back of motion simultaneously (two on top & one on the bottom)
  4. Pull apart.
  5. Replace with 2 AA batteries.

Door Contact

  1. Place flat head screwdriver in slot on short side of contact & press down.
  2. Pull up on contact cover.
  3. Replace with 1 CR123A battery. All Specialty batteries can be purchased from our Head Office location.

Door Contact/ Low Temp/Water Sensor

  1. Depress button on short side of contact
  2. Pull up on cover.
  3. Replace with 2 AAA batteries.

Smoke Detector

  1. Twist unit in counter clockwise rotation
  2. Pull away from ceiling or wall.
  3. Replace with 2 CR123A batteries. All Specialty batteries can be purchased from our Head Office location.

Glass Break Detector

  1. Pull top cover off by pulling up on short side.
  2. Replace with 2 CR123A batteries. All Specialty batteries can be purchased from our Head Office location.

Key Fob

  1. Insert flat head screwdriver into side to separate.
  2. Slide battery out from enclosure
  3. Replace with 1 GP23 battery.

Comments